+61 8 8150 5200

Australia • New Zealand

Gooch & Housego Detector Standards

Home Products Spectroscopy Optical Standards Gooch & Housego Detector Standards

Gooch & Housego Detector Standards

The most complete selection of calibration standards in the industry

Gooch & Housego

OL730-5 Silicon UV-Enhanced Silicon Detectors
The OL730-5A and OL730-5C UV Enhanced Silicon Detectors are 1cm2, high impedence, low capacitance, planar diffusion photodiodes. These detectors, which are sensitive over the wavelength range of 200nm to 1100nm. They are mounted in rugged, aluminium housings that reduce EMI and enhance overall performance.

OL730-TE Thermoelectrically (TE) Cooled Detector
The OL Series 730-TE Thermoelectrically (TE) Cooled Detector Packages are designed for making broadband measurements with radiometer/photometers, such as the OL730A, OL730C and OL730CV, or lock-in amplifiers, such as the OL730D. The OL730-TE Cooled Detectors can also be used for making spectral measurements with spectroradiometer systems, such as the OL Series 750. The standard BNC signal output enables the OL730-TE Detectors to be used with a variety of other instruments as well. All cooler reference settings are controlled by the detector interface board. This enables multiple detectors to be used with the same OL750-TE Cooler Controller.

OL740-17 Thermal Detectors
The OL740-17 is a moderately sensitive, broadband pyroelectric detector. The spectral response is relatively constant over a wide wavelength range. The pyroelectric detector has a 5mm diameter, blackened lithium tantalate crystal and a high-sensitivity current mode preamplifier sealed into a TO-99 transistor housing with an infrared transmitting KRS-5 window. The detector is stable, non-hygroscopic and relatively insensitive to ambient temperature changes.

OL750-HSD High Sensitivity Detector Module

A large selection of High Sensitivity Detector Modules, consisting of a detector head and a detector support module, is available for use with the OL Series 750 Automated Spectroradiometric Measurement System. These detectors enable the OL Series 750 to effectively cover the entire 0.2mm to 30µm wavelength region. Each detector consists of a detector head and a detector support module. The acquisition, amplification and mode of signal processing are designated as the signal detection system.

For further information please contact us or download the datasheet.

Read more on Gooch & Housego's website